简体中文
Русский
Español
Bundor - Butterfly, Gate, Check, Ball, Globe Valve Manufacturer, Supplier & Distributor
Correct installation method of Y-strainer
Posted by Bundor valve
Y-type strainers are important devices used in pipe systems to filter impurities and protect equipment. They are widely used in water treatment, petroleum, chemical and other industries. In order to ensure that they work effectively, the correct installation method is essential. The following are the correct installation steps and precautions for Y-type strainers.
Installation steps
1. Choose a suitable installation location: The Y-strainer should be installed at the front end of equipment such as pumps, valves, and instruments to protect these equipment from impurities. It is usually installed on a horizontal pipe to ensure that the filter is at the low point of the pipe system to facilitate the collection and removal of impurities.
2. Check the filter direction: The Y-strainer is usually marked with the medium flow direction. When installing, it is necessary to ensure that the inlet and outlet directions of the filter are consistent with the pipeline medium flow direction to avoid reverse installation.
3. Cleaning before installation: Before installation, the pipeline and Y-strainer should be cleaned to prevent debris from entering the filter or pipeline system and causing blockage or damage.
4. Install the filter: Connect the Y-strainer to the pipeline and use appropriate tools to tighten the flange or threaded connection to ensure sealing and prevent leakage.
Through proper installation and maintenance, the Y-strainer can effectively protect the pipeline system and equipment, extend its service life, and ensure the stable operation of the system.
Installation steps
1. Choose a suitable installation location: The Y-strainer should be installed at the front end of equipment such as pumps, valves, and instruments to protect these equipment from impurities. It is usually installed on a horizontal pipe to ensure that the filter is at the low point of the pipe system to facilitate the collection and removal of impurities.
2. Check the filter direction: The Y-strainer is usually marked with the medium flow direction. When installing, it is necessary to ensure that the inlet and outlet directions of the filter are consistent with the pipeline medium flow direction to avoid reverse installation.
3. Cleaning before installation: Before installation, the pipeline and Y-strainer should be cleaned to prevent debris from entering the filter or pipeline system and causing blockage or damage.
4. Install the filter: Connect the Y-strainer to the pipeline and use appropriate tools to tighten the flange or threaded connection to ensure sealing and prevent leakage.
Through proper installation and maintenance, the Y-strainer can effectively protect the pipeline system and equipment, extend its service life, and ensure the stable operation of the system.