Double eccentric butterfly valve is mainly used for drainage of water plants, power plants, steel smelting, chemical industry, water source engineering, environmental facility construction, etc., especially suitable for water pipelines, as regulating and intercepting equipment. Compared with the centerline butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, has a longer life and good stability. Compared with other valves, the larger the caliber, the lighter the material, and the lower the cost.
The structural feature of the double eccentric butterfly valve is that the shaft center of the valve stem deviates from the center of the butterfly plate and the center of the body. The double eccentric effect enables the butterfly plate to be released from the valve seat immediately after the valve is opened, which greatly eliminates unnecessary excessive extrusion and scratching of the butterfly plate and the valve seat, reduces the opening resistance, reduces wear and improves The life of the valve seat is improved. The scraping is greatly reduced, and at the same time, the double eccentric butterfly valve can also use a metal seat, which improves the application of the butterfly valve in the high temperature field.
1. The body material is QT450 or WCB, and the chemical composition and mechanical properties meet the requirements of national standards. Material reports can be provided.
2. The valve body and inner parts are processed by CNC precision machine with high precision.
3. Adopt body sealing structure, which is different from the conventional plate sealing structure in the market, and can realize two-way sealing.
4. There are rubber soft seals and stainless steel hard seals available. The valve plate and other parts can also be selected according to the working conditions.
5. The valve seat is welded with stainless steel, which is more wear-resistant and has a longer service life.
6. The valve shaft is supported by self-lubricating sleeve bearings, which can reduce the friction produced during valve shaft transmission and reduce torque.
7. The world-famous brand Aksu epoxy resin spraying is used, and the spraying thickness is 250um.
8. Each valve must be tested in accordance with national standards when leaving the factory, and unqualified products will never leave the factory.
|Name||Design and manufacture||Face to face Length||End Flange||Pressure Test|
|Reference Standard||GB/T 12238||GB/T 12221||GB/T 17241.6||GB/T 13927|
|Name||5-Body||7-Disc||6-Stem||10-Disc Sealing||11-Body Sealing|
Manifestations and causes of valve leakage in power plants
1.Leakage of valve packing. During the operation of power plant valves, there will be a certain degr...Dec.06.2022
Common factors causing internal leakage of valves in pipelines
The main reasons for internal leakage are that the valve cannot be fully closed and the sealing surf...Dec.05.2022
Overhaul and maintenance of check valve in power plant
The internal leakage of the check valve affects the normal operation of the system and poses a threa...Dec.05.2022
Measures to prevent internal leakage of ball valve
As far as the internal leakage of the valve is concerned, its root cause is related to production, t...Nov.21.2022
No.37 Puhui Road,Beizhakou Economic Development Zone, Tianjin City, China PR